2KRC P002 Instrukcja montażu - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka 2KRC P002. 2KRC P002 17 stron. Hyper ep. fun scale racer

Install the Stab. Inside Fuse. And check alignment as

show.

Glue Stab. and Fuse in place with thick CA. or Epoxy

as show.

If use Epoxy please remove the marking tape before

the glue complete dry, so you can get a clean surface.

.install hinges inside Elevator And glue it with thin CA

then install the Elevator To Stab. And glue them

together with thin CA.

Inset Elevator Servo inside the servo tray as show.