2KRC P002 조립 설명서 - 페이지 4

{카테고리_이름} 2KRC P002에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2KRC P002 17 페이지. Hyper ep. fun scale racer

Install the Stab. Inside Fuse. And check alignment as

show.

Glue Stab. and Fuse in place with thick CA. or Epoxy

as show.

If use Epoxy please remove the marking tape before

the glue complete dry, so you can get a clean surface.

.install hinges inside Elevator And glue it with thin CA

then install the Elevator To Stab. And glue them

together with thin CA.

Inset Elevator Servo inside the servo tray as show.