2M Technology 2MTHFR-2M Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Terminale dotykowe 2M Technology 2MTHFR-2M. 2M Technology 2MTHFR-2M 19 stron. Thermo detector
Również dla 2M Technology 2MTHFR-2M: Skrócona instrukcja obsługi (17 strony), Podręcznik użytkownika (8 strony)
Drukuj stronę3. Use a drill to drill two holes with the
depth of 30mm and diameter of 6mm to
6.5mm on the wall.
Wall
Note:
Avoid embedded wires in the wall during drilling!
5. Bracket.
Normal Installation: Align holes on the bracket with installation holes on the wall
and the 86 x 86mm wall‐mounted junction box and use the Phillips screwdriver
to tighten the screws clockwise to fasten the bracket.
Waterproof Installation: The waterproof installation process is basically the same
as the normal installation process. You need to fasten the bracket and waterproof
hood together, for detail, see figure below. After the waterproof installation is
completed, apply enough silicone rubber along the gap between the edge of the
waterproof hood and the wall (left, top and right). Silicone rubber must be
continuous.
(without waterproof hood)
4. Embed expansion bolts inside the
two installation holes on the wall.
(with waterproof hood)
7
Wall