GREEN SERIES FITNESS CIR-TM6000DC-G Instrukcja serwisowa - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Bieżnia GREEN SERIES FITNESS CIR-TM6000DC-G. GREEN SERIES FITNESS CIR-TM6000DC-G 14 stron.

Drukuj stronę

Other Information

3.1.

Console has no power, no display:

Is this a machine that has just

been assembled and installed?

Yes

Check the console wires.

They should not be crushed,

pinched or cut. Refer to

photos at right.

3.2.

Loss of Key Function

Did all keys loose function?

Yes

Turn OFF the AC power.

Wait for 10 seconds then

turn ON the AC power. Are

the keys working properly?

Yes

Caused by external noise.

Need to determine source

and check again.

* The system will not allow the incline keys to function if the wires are not connected from the

incline motor to the motor controller.

www.GreenSeriesFitness.com

Open the motor cover,

check the D8 lamp.

Does it illuminate?

Yes

Open the console and

refer to page 6 and

measure the voltages

of Pin 11 and 12 of the

upper console. Does

it have 12V power?

Yes

Replace the

console PCB.

Open the console and refer to page 6 to

short circuit the pins of the console PCB

related to the non-functional key(s).

Does the key work with the pins shorted

without the membrane or switch?

For example, if the speed key did not

work, short circuit pins 2 and 5 of J2. If

the console is good, the speed should

change.

Replace the membrane key or

the switch PCB.

©May 2015

CIR-TM6000DC-G Revision 1.1

Motor controller faulty.

Replace the motor

controller.

Replace the

console wire.

Yes

Call Toll free (800) 269-7140

Replace the

console PCB.