GREEN SERIES FITNESS CIR-TM6000DC-G Instrukcja serwisowa - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Bieżnia GREEN SERIES FITNESS CIR-TM6000DC-G. GREEN SERIES FITNESS CIR-TM6000DC-G 14 stron.

Drukuj stronę

2. Error Signal Check And Solutions

【

S PEED ERROR

2.1.

seconds during operation. All windows of the display are off and all output signals will

stop, and then show

*If this is a new product that has just finished being assembled, there is a possibility of

problems in assembly. Check the wire connections and confirm that the wires and cables

have not been damaged during assembly.

Determine Cause and Solution:

SPEED ERROR

Turn OFF the AC power

and wait 10 seconds.

Turn ON the AC power.

Press START

Is the running belt moving?

Did the error signal disappear?

Yes

Speed Feedback

system program. If

this happens on a

regular basis,

replace the console.

www.GreenSeriesFitness.com

】：

T he system cannot receive signal from speed sensor for over 15

S PEED ERROR

【

Open the motor hood and then

turn ON the AC power. Press

START to begin and then

check the pilot lamp on the

motor controller. Did the D1

Yes

lamp illuminate?

Motor controller defective.

Replace speed sensor.

©May 2015

CIR-TM6000DC-G Revision 1.1

】

Yes

Replace the controller.

Did the D4 lamp

illuminate and

the D2 lamp

flash while

starting? (After 3

seconds,

starting to count

down)

Yes

Console PCB

damaged.

Replace the

console PCB.

Call Toll free (800) 269-7140