IKEA 105.089.94 Podręcznik - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik dla Zmywarka IKEA 105.089.94. IKEA 105.089.94 32 stron.
Drukuj stronę
ENGLISH
Problem and alarm code
You cannot activate the appli‐
ance.
The programme does not
start.
The appliance does not fill
with water.
• The lights related to the
programme buttons flash
1 time intermittently.
• An acoustic signal sounds
intermittently.
The appliance does not drain
the water.
• The lights related to the
programme buttons flash
2 times intermittently.
• An acoustic signal sounds
intermittently.
The anti-flood device is on.
• The lights related to the
programme buttons flash
3 times intermittently.
• An acoustic signal sounds
intermittently.
The appliance stops and
starts more times during op‐
eration.
The programme lasts too
long.
Small leak from the appli‐
ance door.
Possible cause and solution
• Make sure that the mains plug is connected to the mains
socket.
• Make sure that there is no damaged fuse in the fuse box.
• Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for the
end of the countdown.
• The appliance recharges the resin inside the water soften‐
er. The duration of the procedure is approximately 5 mi‐
nutes.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authori‐
ty.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.
• Make sure that the sink spigot is not clogged.
• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.
• Close the water tap.
• Make sure that the appliance is correctly installed.
• Make sure the baskets are loaded as instructed in the
user manual.
• It is normal. It provides optimal cleaning results and ener‐
gy savings.
• If the delay start option is set, cancel the delay setting or
wait for the end of the countdown.
• Activating Power Clean increases the programme dura‐
tion.
• The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
• The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
22