IKEA IUD9500WX4 Instrukcja instalacji - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka IKEA IUD9500WX4. IKEA IUD9500WX4 48 stron. Undercounter dishwasher
Również dla IKEA IUD9500WX4: Instrukcje użytkownika (25 strony)

Drukuj stronę

Connect wires black to black and white to white, using UL

Listed/CSA Approved twist-on wire connectors (not included).

If needed, see website for animated representation

of this step.

Visit www.ikea.com/electrical

under FAQ tab.

Tighten strain relief screws to secure cable.

Place wires inside terminal box. Insert tabs on left side of cover.

Make sure wires are tucked inside box. Close cover ensuring

wtres are not pinched. Use 1/4"nut driver and previously removed

screw to secure cover.

D/sB

sBe/"

Cc bne

Open/sg

Check that dishwasher is still level front-to-back

and side-to-side

in cabinet opening.

Open dishwasher door, remove lower dish rack, and place towel

over pump assembly and lower spray arm of dishwasher. This will

keep screws from falling into pump area when you are securing

dishwasher to countertop.

NOTE: Do not drop screws into bottom of dishwasher. If using

side mounting, you must predrill (1/8"drill bit) pilot holes in cabinet

to avoid splitting the wood before installing screws.

Locate brackets on top of dishwasher and secure dishwasher to

countertop with two, #10 x 1/2"Phillips-head screws (included).

The dishwasher must be secured to keep it from shifting when

door is opened.