GAPOSA QCzero2 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Jednostka sterująca GAPOSA QCzero2. GAPOSA QCzero2 12 stron. Control unit for single phase motors

Drukuj stronę

IMPORTANT NOTES

1. On the remote control switches' head there are 20 screws. In order to avoid

any bad functioning ALL THE SCREWS OF THE REMOTE CONTROL

SWITCHES MUST BE TIGHTENED (the same must be done for the

terminals' screws).

2. IT IS ABSOLUTELY FORBIDDEN TO MECHANICALLY ACTIVATE THE

REMOTE CONTROL SWITCHES BY PUSHING THE ORANGE BUTTON

3. KEEP THIS INSTRUCTIONS' SHEET.

3. POWER SUPPLY

230 Vac = L1 L3

MOTOR = D S PC

4. BOOSTER CAPACITOR

The booster capacitor must be connected to the BOOSTER terminal on the upper part of the

electronic card. It is not necessary to respect the polarity.

5. SAFETY FUSE

Inside the control unit there is a fuse engaged for the protection of both the inputs and the

24 Vac power line from short circuits and/or overloads. If damaged, the fuse "FUSE2" must be

replaced with a new 2,5 A fuse.

Control unit for single phase motors

D S

230V - 50Hz