CORNING Lambda EliteMax Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt laboratoryjny CORNING Lambda EliteMax. CORNING Lambda EliteMax 5 stron. Semi-automated benchtop pipettor
Drukuj stronęLinked File Information
If you would like to save your protocol for future use, check the
Link File box in the upper right corner. When selected, the Linked
File Information box will appear in the bottom left.
Here you can modify:
File name: Specify the name of the protocol to be executed when
◗
the current protocol is completed.
Link file delay: Specify a time delay value in seconds between
◗
completion of the current protocol and the start of the next
linked protocol.
Home machine when linking files: When this box is checked, the
◗
instrument will perform a full Home axis routine.
Stop and ask operator to continue: When this box is checked,
◗
the instrument will pause between protocols until the operator
instructs the instrument to continue.
NOTE: It is recommended that you create all of your protocols first,
and then add the links between them.
Single-channel Protocol Settings Tab
When the Single-channel Head Protocol tab is selected, a table
showing the steps of each protocol is presented. Protocols are
executed from Top to Bottom, and each protocol is interpreted
from Left to Right.
Magazine
Source
Destination
Tip
Plate
Additional
Row
Customization
Under the table are settings to edit the table controls:
Auto-keypad: An alphanumeric keypad will automatically pop up
◗
when double tapping a table cell.
Insert row: Insert an empty or copied row into the table.
◗
Delete row: Delete a selected row from the table.
◗
Copy row: Copy a selected row from the table.
◗
Clear row: Clear the contents of a selected row.
◗
New protocol: This button will erase all fields in the table.
◗
Grid Reference Numbers
The image below shows the grid reference numbers (x,x) for the
Landscape and Portrait Orientations.
Once you have finished editing, press Run in the upper right corner
and the instrument will begin performing the protocol.
Cleaning and Maintenance
The instrument requires minimal routine cleaning.
The exterior of the instrument can be cleaned using a microfiber
◗
cloth.
The deck plates can be cleaned with a microfiber cloth, soap, and
◗
water (soap and water or just isopropyl alcohol).