CORNING Lambda EliteMax 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} CORNING Lambda EliteMax에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING Lambda EliteMax 5 페이지. Semi-automated benchtop pipettor

페이지 인쇄

Linked File Information

If you would like to save your protocol for future use, check the

Link File box in the upper right corner. When selected, the Linked

File Information box will appear in the bottom left.

Here you can modify:

File name: Specify the name of the protocol to be executed when

◗

the current protocol is completed.

Link file delay: Specify a time delay value in seconds between

◗

completion of the current protocol and the start of the next

linked protocol.

Home machine when linking files: When this box is checked, the

◗

instrument will perform a full Home axis routine.

Stop and ask operator to continue: When this box is checked,

◗

the instrument will pause between protocols until the operator

instructs the instrument to continue.

NOTE: It is recommended that you create all of your protocols first,

and then add the links between them.

Single-channel Protocol Settings Tab

When the Single-channel Head Protocol tab is selected, a table

showing the steps of each protocol is presented. Protocols are

executed from Top to Bottom, and each protocol is interpreted

from Left to Right.

Magazine

Source

Destination

Tip

Plate

Additional

Row

Customization

Under the table are settings to edit the table controls:

Auto-keypad: An alphanumeric keypad will automatically pop up

◗

when double tapping a table cell.

Insert row: Insert an empty or copied row into the table.

◗

Delete row: Delete a selected row from the table.

◗

Copy row: Copy a selected row from the table.

◗

Clear row: Clear the contents of a selected row.

◗

New protocol: This button will erase all fields in the table.

◗

Grid Reference Numbers

The image below shows the grid reference numbers (x,x) for the

Landscape and Portrait Orientations.

Once you have finished editing, press Run in the upper right corner

and the instrument will begin performing the protocol.

Cleaning and Maintenance

The instrument requires minimal routine cleaning.

The exterior of the instrument can be cleaned using a microfiber

◗

cloth.

The deck plates can be cleaned with a microfiber cloth, soap, and

◗

water (soap and water or just isopropyl alcohol).