Makita 5046D Informacje techniczne - Strona 2

Przeglądaj online lub pobierz pdf Informacje techniczne dla Elektronarzędzie Makita 5046D. Makita 5046D 7 stron. Makita cordless circular saws with dust collection
Również dla Makita 5046D: Instrukcja obsługi (12 strony)

Drukuj stronę
Makita 5046D Informacje techniczne
5026D, 5036D, 5046D
Coloured dust box with enough space
for dust collecting
The collectable dust volume in the box, corresponds to
approx. over 10 cuts in cutting ceramic siding board 455mm x 12mm
approx. 50 cuts in cutting ceramic siding board 8-1/4" x 5/16"
The colours of dust boxes show the purposes of the machines.
They are
Blue : Wood works
Purple: Siding works
Orange: Metal works
Superior to competitor's 24V product
Connectable with vacuum cleaner
The operator can enjoy clean work by connecting
with the vacuum cleaner equipped with ø36m hose.
Durable base plate with
fine surface suitable for
metal and siding works.
It prevents to damage
the work piece especially
in siding works.
Convenient depth adjust
lever
It is placed inside the side line
of base plate. Even when cutting
stocks with guide lumber, the lever
does not interfere with guide lumber
lever
Thumb screw for replacement of saw blade.
Loosen thumb screw and remove dust box.
So, the saw blade can be replaced.
Dust proof structure
The following features are same to that of Mod.5621D.
* Equipped with 18V battery.
* Convenient lock off button easy to operate for both left and right handed operator.
* Equipped with long life motor and its carbon brushes can be changeable.
* Equipped with rip fence
( In case of Mod.EZ3513 of Panasonic, the rip fence can not be installed on the machine
and in case of Mod.EZ3530 of the same, it is optional accessory in stead of standard one.)
* Hex wrench can be stored in the machine.
High dust collecting rate
even without connecting with
vacuum cleaner
In case of Mod.5036D
80% cutting in ceramic siding board 12mm thick
70% cutting in HARDIE BOARD 5/16" thick
Equipped with 160mm (6-1/4") tipped saw
for siding and metal works.
And 165mm (6-1/2") tipped saw for wood works.
For USA, Canada and Australia,
these machines are equipped with
hex socket head bolt instead.
Punched hole for aligning
with cutting line.
Cutting line