e-Station ES-WPP2M32/0 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka e-Station ES-WPP2M32/0. e-Station ES-WPP2M32/0 16 stron. Wall-box / home charger
Drukuj stronęInstallation instructions
3 / 8 ENG
Installation instructions
Installation and connection of the product should only be done by a
quali ed electrician.
Read the installation instruction carefully prior to starting the installation.
Make sure that the supply voltage and capacity are correct and supply lines
are properly secured.
Check the contents of the carton ensuring that the unit is undamaged.
Establish a suitable location for mounting the WallBox unit in association with the
electric vehicle's parked charging location.
Remove the WallBox unit from its protective packaging.
Using a screwdriver, remove the WallBox unit's front cover by removing the 6x
screws located in the cover that attach to the base unit, taking care to place the
screws in a safe place.
Carefully drill out a hole in each of the four raised oval mounting lugs to sit the
size of your intended xings bolts or screws.
Holding the WallBox unit in its desired position, mark through the holes by
inserting a marker pencil through the base unit's drilled holes onto the intended
mounting surface.
Establish where you wish the supply/earth cable to enter the unit and drill out the
hole to accept the appropriate cable gland. Please note that the top cable entry is
not available for use on tethered lead versions.
Using the marks on the wall, mount the WallBox unit. Screw or bolt into place
giving consideration to the use of washers to seal.
Connect the supply/earth cable in accordance with IET code of practice.
On completion of electrical connections, check all other terminations and test.
Carefully re- t the front cover to the base unit taking care to align switchgear and
the access pod whilst ensuring that the cover is properly tted to the base unit
and secured with the 6x xing screws provided.