e-Station ES-WPP2M32/0 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka e-Station ES-WPP2M32/0. e-Station ES-WPP2M32/0 16 stron. Wall-box / home charger
Drukuj stronęControl
4 / 8 ENG
Control
Always verify that cable and plugs are dry and not damaged.
Using the EV Charging Station (Home Charger - Tethered Lead Versions):
Check if the EV is in need of a charge.
Check that the charging station is in Blue LED status mode.
Unplug charging gun from holster.
Uncoil charging lead and insert into EV charging socket.
Charging should automatically commence and LED status change to green.
On completion of charge, the station will automatically cease the charging
procedure, switch o and the LED status indicator will change back to blue.
Remove charging lead form EV, coil tidily back onto charging station and re-insert
charging gun back into holster.
Using the EV Charging Station (Wall Box - Socket Versions):
Check if the EV is in need of a charge.
Check that the charging station is in Blue LED status mode.
Uncoil the plug-to-plug charging lead and plug into EV rst and then into
charging station socket.
Charging should automatically commence and LED status change to green.
On completion of charge, the station will automatically cease the charging
procedure, switch o and the LED status indicator will change back to blue.
Remove charging lead form EV and charging station, coil up and store in a dry,
safe location.
To stop charging, disconnect lead from the vehicle before disconnecting from
charging station to allow the cable lock to release.