ALIBI ALI-BC1720LPC Szybka instalacja i instrukcja obsługi
Przeglądaj online lub pobierz pdf Szybka instalacja i instrukcja obsługi dla Kamera IP ALIBI ALI-BC1720LPC. ALIBI ALI-BC1720LPC 4 stron. 720p hd-tvi license plate camera
Drukuj stronęALI-BC1720LPC 720P HD-TVI
License Plate Camera
Quick Installation and User Guide
The ALI-BC1720LPC License Plate Camera feature a progressive scan 720p sensor that delivers HD-TVI high-
definition video resolution over RG59 coax or any standard analog CCTV cabling. This HD video camera is
ideal for license plate recognition.
NOTE: This camera does not include a mounting bracket. Contact your vendor for bracket options.
Features
1.27 megapixel progressive scan sensor provides 720P resolution
•
HD-TVI and CVBS video output
•
6 ~ 22 mm motorized zoom lens with motorized focus
•
0.001 Lux ultra-low light rating
•
0 lux with white light LEDs
•
UTC Up the Coax Control
•
IP66 rated housing
•
White light LEDs (6)
Motorized Lens
Photosensor
Drop cable
Mount point
CVBS video BNC connector*
Camera drop cable connectors
* Drop cable BNC connectors are labeled for TVI (HD-TVI) or CVBS.
www.observint.com
1
Sun shield
Camera back
HD-TVI video BNC
connector*
12 Vdc power connector
Mounting screw holes
Mounting
base
Camera underside - mounting base
Optional ALI-AB4 mounting bracket for ALI-BC1720LPC camera (includes mounting fasteners)
What's in the box
Camera assembly
•
This installation and user guide
•
TOOLS YOU NEED
To install the camera, you will need:
12 Vdc power source. See Specifications for power requirement.
•
Compatible mounting bracket with tools and fasteners for mounting the camera
•
Video and power extension cables
•
CCTV video setup monitor (optional)
•
INSTALLATION
Before installation:
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera
•
and mounting bracket.
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
•
provide the rated voltage and wattage for the camera. See the Specifications section.
During installation:
Camera Lens: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or LED
•
array shield becomes soiled, clean it only with mild glass cleaner.
Monitor impedance: Set the CVBS monitor impedance switch to 75 Ω.
•
Camera drop cable: The camera drop cable includes two connectors:
•
Video BNC connectors: For transmission of the video signal across a coax (75 Ω) extension
—
cable. BNC connectors are labeled for the signal type. Connect the TVI drop cable to an HD-TVI
hybrid video recorder interface, and the CVBS drop cable to an NTSC monitor or a CVBS recorder
video input.
Power connector: When applying 12 Vdc power, observe the power polarity. The polarity is
—
marked on the connector.
ALI-BC1720LPC_CQ
12/8/15