HIKVISION DS-9100 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR HIKVISION DS-9100. HIKVISION DS-9100 8 stron. Hybrid dvr, nvr, analog dvr
Również dla HIKVISION DS-9100: Skrócona instrukcja obsługi (13 strony)
Drukuj stronę
Quick Start Guide
DS-9000 / DS-9100 Series DVR
Menu Structure
The menu structure of the DS-9000 / DS-9100 Series DVR is
as followed:
Startup and Shutdown
Proper startup and shutdown procedures are crucial to
expanding the life of your DVR.
To startup your DVR:
1. Ensure the power supply is plugged into an electrical
outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) is used in
conjunction with the unit. The Power indicator LED on
the front panel should turn red, indicating the unit is
receiving power.
2. Press the POWER button on the front panel. The Power
indicator LED should turn blue. The unit will begin to
start.
3. After startup, the Power indicator LED will remain blue.
A splash screen with the status of the DSP and HDD will
be shown. The first row of icons at the bottom of the
screen shows the DSP status. If an 'X' is shown on top of
an icon, it means that the DSP initialization has failed.
The second row of icons shows the HDD status. If an 'X'
is shown, it means that the HDD is not installed or cannot
be detected.
(V1.0.2)
There are two proper ways to shutdown the DVR. To
shutdown the DVR:
•
OPTION 1: Standard Shutdown
1. Enter the Shutdown menu by clicking on Menu >
2. Select the Shutdown button.
3. Click the Yes button.
•
OPTION 2: Manual Shutdown
1. Press and hold the POWER button for 3 seconds.
2. Enter the administrator's username and password in the
dialog box for authentication.
3. Click the Yes button.
Note:
system is shutting down.
Using the Setup Wizard
By default, the
Setup Wizard will
start once the
DVR has loaded.
The Setup Wizard
will walk you
through some of
the more important settings of your DVR. If you do not
wish to use the Setup Wizard at this time, click the Cancel
button. You may also choose to use the Setup Wizard at a
later time by leaving the "Start Wizard when DVR starts?"
checkbox checked.
To start using the Setup Wizard:
Quick Start Guide - DS-9000 / DS-9100 Series DVR
Shut down.
Do not press the POWER button again when the
1