HIKVISION DS-9100 Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für DVR HIKVISION DS-9100 herunter. HIKVISION DS-9100 8 Seiten. Hybrid dvr, nvr, analog dvr
Auch für HIKVISION DS-9100: Schnellstart-Handbuch (13 seiten)

Seite drucken

Quick Start Guide

DS-9000 / DS-9100 Series DVR

Menu Structure

The menu structure of the DS-9000 / DS-9100 Series DVR is

as followed:

Startup and Shutdown

Proper startup and shutdown procedures are crucial to

expanding the life of your DVR.

To startup your DVR:

1. Ensure the power supply is plugged into an electrical

outlet. It is HIGHLY recommended that an

Uninterruptible Power Supply (UPS) is used in

conjunction with the unit. The Power indicator LED on

the front panel should turn red, indicating the unit is

receiving power.

2. Press the POWER button on the front panel. The Power

indicator LED should turn blue. The unit will begin to

start.

3. After startup, the Power indicator LED will remain blue.

A splash screen with the status of the DSP and HDD will

be shown. The first row of icons at the bottom of the

screen shows the DSP status. If an 'X' is shown on top of

an icon, it means that the DSP initialization has failed.

The second row of icons shows the HDD status. If an 'X'

is shown, it means that the HDD is not installed or cannot

be detected.

(V1.0.2)

There are two proper ways to shutdown the DVR. To

shutdown the DVR:

•

OPTION 1: Standard Shutdown

1. Enter the Shutdown menu by clicking on Menu >

2. Select the Shutdown button.

3. Click the Yes button.

•

OPTION 2: Manual Shutdown

1. Press and hold the POWER button for 3 seconds.

2. Enter the administrator's username and password in the

dialog box for authentication.

3. Click the Yes button.

Note:

system is shutting down.

Using the Setup Wizard

By default, the

Setup Wizard will

start once the

DVR has loaded.

The Setup Wizard

will walk you

through some of

the more important settings of your DVR. If you do not

wish to use the Setup Wizard at this time, click the Cancel

button. You may also choose to use the Setup Wizard at a

later time by leaving the "Start Wizard when DVR starts?"

checkbox checked.

To start using the Setup Wizard:

Quick Start Guide - DS-9000 / DS-9100 Series DVR

Shut down.

Do not press the POWER button again when the