Avanti IM3202SS Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kostkarka do lodu Avanti IM3202SS. Avanti IM3202SS 20 stron. Avanti refrigerator ice maker combo model number: im320299
Drukuj stronę?WARNING?
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
DANGER OR WARNING: RISK OF CHILD ENTRAPMENT.
CHILD ENTRAPMENT AND SUFFOCATION ARE NOT PROBLEMS OF THE PAST.
JUNKED OR ABANDONED APPLIANCES ARE STILL DANGEROUS. . . EVEN IF THEY
WILL "JUST SIT IN THE GARAGE A FEW DAYS."
BEFORE YOU THROW AWAY YOUR APPLIANCE: TAKE OFF THE DOORS. LEAVE THE
SHELVES IN PLACE SO THAT CHILDREN MAY NOT EASILY CLIMB INSIDE.
NEVER ALLOW CHILDREN TO OPERATE, PLAY WITH, OR CRAWL INSIDE THE
APPLIANCE.
NEVER CLEAN APPLIANCE PARTS WITH FLAMMABLE FLUIDS. THE FUMES CAN
CREATE A FIRE HAZARD OR EXPLOSION.
D O NOT STORE OR USE GASOLINE OR ANY OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN CREATE A FIRE
HAZARD OR EXPLOSION.
?
BEFORE USING YOUR APPLIANCE
REMOVE THE EXTERIOR AND INTERIOR PACKING.
CHECK TO BE SURE YOU HAVE ALL OF THE FOLLOWING PARTS:
1 ICE BUCKET
1 WINE BOTTLE SHELF
1 STRAIGHT SHELF
1 BOTTOM RACK
1 PLASTIC SCOOP
25 FEET HOSE
1 INSTRUCTION MANUAL
BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE, LET IT STAND UPRIGHT
FOR APPROXIMATELY 2 HOURS. THIS WILL REDUCE THE POSSIBILITY OF A MALFUNCTION
IN THE COOLING SYSTEM FROM HANDLING DURING TRANSPORTATION.
CLEAN THE INTERIOR SURFACE WITH LUKEWARM WATER USING A SOFT CLOTH.
?
INSTALLATION OF YOUR APPLIANCE
THIS APPLIANCE IS DESIGNED TO BE RECESSED OR BUILT-IN (FULLY RECESSED).
PLACE YOUR APPLIANCE ON A FLOOR THAT IS STRONG ENOUGH TO SUPPORT THE
APPLIANCE WHEN IT IS FULLY LOADED. REMEMBER THAT THE UNIT WILL BE
SIGNIFICANTLY HEAVIER ONCE IT IS FULLY LOADED. TO LEVEL YOUR APPLIANCE, ADJUST
THE LEGS AT THE FRONT OF THE APPLIANCE.
LOCATE THE APPLIANCE AWAY FROM DIRECT SUNLIGHT AND SOURCES OF HEAT
(STOVE, HEATER, RADIATOR, ETC.). DIRECT SUNLIGHT MAY AFFECT THE ACRYLIC
COATING AND HEAT SOURCES MAY INCREASE ELECTRICAL CONSUMPTION. EXTREME
COLD AMBIENT TEMPERATURES MAY ALSO CAUSE THE APPLIANCE NOT TO PERFORM
PROPERLY.
AVOID LOCATING THE APPLIANCE IN MOIST AREAS. TOO MUCH MOISTURE IN THE AIR
WILL CAUSE FROST TO FORM QUICKLY ON THE EVAPORATOR REQUIRING MORE
FREQUENT DEFROSTING OF THE APPLIANCE.
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK, OR INJURY WHEN
USING YOUR APPLIANCE, FOLLOW THESE
BASIC PRECAUTIONS:
-SAVE THESE INSTRUCTIONS-
INSTALLATION INSTRUCTIONS
9