Garden Gear D2939 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Garden Gear D2939. Garden Gear D2939 12 stron. 3.6v trimming shears

Before first use

Carefully remove the tool from its packaging and check that the below

contents are included:

•

Shear with grass blades (assembled)

•

Trimming blade

•

Blade guard (for both blades)

•

Battery charger

The battery charger should be fully charged before using for the first time. The

charging time is about 3-5 hours.

Charging the battery

Check that your mains voltage is the same as that marked on the rating

plate of the battery charger.

Connect the charger to the charging socket (7) at the rear of the

handle grip (1).

Plug the battery charger in a power socket. The red LED will come on

to indicate that charging is underway.

The temperature of the battery may rise slightly during the charging

operation. This is normal.

As soon as battery is fully charged, the red LED will turn off.

If the LED light does not come on or the battery fails to charge, check

whether there is voltage at the socket.

Regular recharging of the battery is advised to maintain full power of the

shears. Recharging is necessary when you notice a drop in the tool's

performance.

Never allow the battery to become fully discharged. This may cause a fault

to develop.

Instructions for use

This product is intended for light trimming of garden hedges, shrubs and lawn

edges.

Push the safety lock-off (5) then depress the on/off switch (6). This will

start the trimming shears.

Please note: when you release the on/off switch it will re-engage the

safety lock-off switch, this is to prevent accidental start-up.

Practice with the shears first on small areas until you are more

comfortable.

Work in straight rows, keeping the head of the trimmer at the correct

height and not pointing down to the earth.