Avantree Saturn Pro Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odbiornik Avantree Saturn Pro. Avantree Saturn Pro 10 stron. Low latency bluetooth receiver and transmitter 2-in-1
Również dla Avantree Saturn Pro: Podręcznik użytkownika (3 strony)
Drukuj stronę
- 1. Product Description
- 2. Product Overview
- 3. What’s in the Box
- 4. Charging
- 5. Transmitter - Turn on / off
- 6. Transmitter - Pairing with a Bluetooth Device
- 7. Pairing Procedure
- 8. LED Indications
- 9. Receiver - Turn on / off
- 10. Receiver - Pairing with a Bluetooth Device
- 11. Obtaining the Maximum Stable Range
- 12. Use Two as a Pair
- 13. Reconnect
- 14. Restore Factory Default Setting
- 15. Product Specification
- 16. Safety Information
3. Charging
Saturn Pro comes with a built-in rechargeable battery that provides for long periods of operation and standby time. We recommend
charging the battery fully before using Saturn Pro for the first time.
Insert one end of Micro USB charging cable to Saturn Pro Micro USB socket and plug the other end into a standard USB power
1)
source, such as a laptop or desktop computer.
The battery takes 3 hours to charge to its full capacity for the first time. Each subsequent charge cycle should then take around 2
2)
hours.
The LED indicator will show red when charging and will go out when charging is complete.
3)
If you have not used the device for a few months, the LED might not show red when first charging. It may take 15-35 minutes
4)
before the LED lights up.
We recommend fully charging the device at least every two months.
5)
*Charging times may vary when using different chargers.
4. Transmitter - Turn On / Off
Slide TX / RX switch to TX positon before turning on. The TX or RX mode cannot be changed after powering up Saturn Pro.
Turn On: Press and hold the MFB for about 5 seconds until the LED lights blue for 1 second.
Turn Off: Press and hold the MFB for about 3 seconds until the LED shows red for 1 second and then goes out.
Note: For first time use or first time turn on after the connection list has been cleared, in transmit mode Saturn Pro will automatically
enter pairing mode, indicated by the LED indicator flashing blue quickly.