Avantree Saturn Pro Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odbiornik Avantree Saturn Pro. Avantree Saturn Pro 10 stron. Low latency bluetooth receiver and transmitter 2-in-1
Również dla Avantree Saturn Pro: Podręcznik użytkownika (3 strony)
Drukuj stronę
- 1. Product Description
- 2. Product Overview
- 3. What’s in the Box
- 4. Charging
- 5. Transmitter - Turn on / off
- 6. Transmitter - Pairing with a Bluetooth Device
- 7. Pairing Procedure
- 8. LED Indications
- 9. Receiver - Turn on / off
- 10. Receiver - Pairing with a Bluetooth Device
- 11. Obtaining the Maximum Stable Range
- 12. Use Two as a Pair
- 13. Reconnect
- 14. Restore Factory Default Setting
- 15. Product Specification
- 16. Safety Information
3) Saturn Pro will pair with stereo Bluetooth receiver devices with the PIN codes "0000", "1111", "8888" or "1234".
5.2 LED indications:
LED indicator
LED blinks BLUE continuously
LED flashes BLUE once every second
LED flashes BLUE once every 5 seconds
LED flashes BLUE twice every 5 seconds
LED flashes BLUE three times every 5 seconds
LED blinks RED
We find that most problems are caused by improper pairing. Please follow the online instructions step-by-step!
6. Receiver - Turn On / Off
Slide TX / RX switch to RX mode before turning on. The TX or RX mode cannot be changed after powering up Saturn Pro.
Turn On: Press and hold Saturn Pro's MFB for around 7 seconds until the LED indicator shows blue for 1 second.
Turn Off: Press and hold the MFB for around 3 seconds until the LED shows red for 1 second and then goes out.
7. Receiver - pairing with a Bluetooth device
7.1 Pairing procedure:
1) Ensure Saturn Pro's TX/RX switch is set to RX mode and that the device is off.
2) Plug the 3.5 mm audio cable into Saturn Pro's 3.5 mm audio socket and plug the other end into the audio input of your home hi-fi
stereo system.
3) Press and hold Saturn Pro's MFB for around 7 seconds until the LED indicator quickly blinks blue and red alternately, indicating in
pairing mode.
4 Place Saturn Pro within 1 metre of your Bluetooth enabled phone. Set your smartphone to Bluetooth mode: Taking iPhone as an
example: from your iPhone home page, tap "Settings"
(Note: Different phones or tablets have different procedures to activate Bluetooth mode and to pair and connect with other
Status of Saturn Pro under TX mode
Pairing mode, lasts for 2 minutes
Standby mode - not connected to any other device
Device connected with SBC
Device connected with aptX
Device connected with aptX low latency
Low battery power - Please recharge
"General "
" Bluetooth"
" On"