HIKVISION DS-3WF03C Skrócona instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy HIKVISION DS-3WF03C. HIKVISION DS-3WF03C 16 stron.
Drukuj stronę
After the preparation is completed, start the device configuration.
Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of
the device. On the same network segment, use a browser to log in to the device, open a browser,
and enter the default IP address of the device in the address bar: 192.168.1.36.
When you log in to the device for the first time, click Enter, enter the device activate page. The
user name is admin, and the user password is set by the user. You also need to select your
password, country, language and time zone, as shown in Figure 4-1. Check "I agree to these
terms of use" and click "Activate". Take the AP device as an example.
Step 2 Go to the device page and click the "Wizard" bar at the top of the page to enter the
"Network" page to set the IP address of the device. In the address field of the LAN IP, fill in
DS-3WF03C Quick Start Guide
Chapter 4 Configuration
Figure 4-1 login
12