HIKVISION DS-3WF03C Hızlı Başlangıç Kılavuzu - Sayfa 13
Ağ Donanımı HIKVISION DS-3WF03C için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-3WF03C 16 sayfaları.
Sayfayı Yazdır
After the preparation is completed, start the device configuration.
Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of
the device. On the same network segment, use a browser to log in to the device, open a browser,
and enter the default IP address of the device in the address bar: 192.168.1.36.
When you log in to the device for the first time, click Enter, enter the device activate page. The
user name is admin, and the user password is set by the user. You also need to select your
password, country, language and time zone, as shown in Figure 4-1. Check "I agree to these
terms of use" and click "Activate". Take the AP device as an example.
Step 2 Go to the device page and click the "Wizard" bar at the top of the page to enter the
"Network" page to set the IP address of the device. In the address field of the LAN IP, fill in
DS-3WF03C Quick Start Guide
Chapter 4 Configuration
Figure 4-1 login
12