Lexmark E360D series (Niemiecki) Podręcznik uzupełniający - Strona 8

Przeglądaj online lub pobierz pdf (Niemiecki) Podręcznik uzupełniający dla Drukarka Lexmark E360D series. Lexmark E360D series 9 stron. Loading paper
Również dla Lexmark E360D series: Konfiguracja i instalacja (2 strony), Broszura i specyfikacje (4 strony), Broszura i specyfikacje (4 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik uzupełniający (5 strony), Instrukcja rozwiązywania problemów (8 strony)

Drukuj stronę
Lexmark E360D series (Niemiecki) Podręcznik uzupełniający
To replace the toner cartridge:
1
Open the front door by pressing the button on the left side of
the printer and lowering the door.
2
Press the button on the base of the photoconductor kit, and
then pull the toner cartridge out using the handle.
3
Unpack the new toner cartridge.
Warning—Potential Damage: When replacing a toner
cartridge, do not leave the new cartridge exposed to direct
light for an extended period of time. Extended light exposure
can cause print quality problems.
4
Rotate the cartridge in all directions to distribute the toner.
5
Install the new toner cartridge by aligning the rollers on the
toner cartridge with the arrows on the tracks of the
photoconductor kit. Push the toner cartridge in as far as it will
go. The cartridge clicks into place when correctly installed.
6
Close the front door.
8
Cleaning the exterior of the
printer
1
Make sure that the printer is turned off and unplugged from
the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of
electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and
disconnect all cables to the printer before proceeding.
2
Remove all paper from the printer.
3
Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household
cleaners or detergents, as they may damage the finish of the
printer.
4
Wipe only the outside of the printer.
Warning—Potential Damage: Using a damp cloth to clean
the interior may cause damage to your printer.
5
Make sure all areas of the printer are dry before beginning a
new print job.