Makita 14.4 V 8443D Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 14.4 V 8443D. Makita 14.4 V 8443D 19 stron. 12v / 14.4 v / 18 v cordless percussion-driver drill equipped with electric brake

Drukuj stronę

Selecting the action mode

This tool employs an action mode changing

ring Select one

the three modes suit-

able for your work needs by using this ring

For rotation only, turn the ring so that the

arrow on the tool body points toward the

aoomark on the ring For rotation with

hammering, turn the ring so that the arrow

points toward the +on

the ring For rota-

tion with clutch, turn the ring so that the

arrow points toward the

mark on the

ring

Action moc

changing ri

Arrow

CAUTION:

Always set the ring correctly to your desired mode mark. If you operate the tool with the

ring positioned half-way between the mode marks, the tool may be damaged

Adjusting the fastening torque

The fastening torque can be adjusted in 16

steps by turning the adjusting ring so that

its graduations are aligned with the arrow

on the tool body. The fastening torque is

minimum when the number 1 is aligned

with the arrow, and maximum when the

number 16 is aligned with the arrow.

Before actual operation, drive a trial screw

into your material or a piece of duplicate

material to determine which torque level is

required for a particular application.

Graduations

Arrow