Makita 14.4 V 8443D Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 14.4 V 8443D. Makita 14.4 V 8443D 19 stron. 12v / 14.4 v / 18 v cordless percussion-driver drill equipped with electric brake

Drukuj stronę

Adjustable depth rod

The adjustable depth rod is used to drill

holes of uniform depth Loosen the thumb

screw, set to desired position, then tighten

the thumb screw

OPERATION

Screwdriving operation

First, turn the actlon mode changing ring so

that the arrow on the tool body points to

the wS3 marking Adjust the adjusting ring

to the proper torque level for your work

Then proceed as follows

Place the point of the driver bit in the screw

head and apply pressure to the tool Start

the tool slowly and then increase the speed

gradually Release the trigger as soon as

the clutch cuts in

NOTE:

*Make sure that the driver bit is inserted straight in the screw head, or the screw and/or

bit may be damaged

When driving wood screws, predrill pilot

holes to make driving easier and to pre-

vent splitting of the workpiece. See the

chart.

8 13/16")

3 1 - 3

1118''

9/M"l

*If the tool is operated continuously until the battery cartridge has discharged, allow the

tool to rest for 15 minutes before proceeding with a fresh battery.