Makita 6203DWAE Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wiertarka Makita 6203DWAE. Makita 6203DWAE 17 stron. Cordless driver drill equipped with electric brake
Również dla Makita 6203DWAE: Informacje techniczne (5 strony)

Drukuj stronę

Installing

removing battery cartridge

*Always switch off the tool before insertion

or removal of the battery cartridge.

*To remove the battery cartridge, withdraw

it from the tool while pressing the buttons

on both sides of the cartridge.

*To insert the battery cartridge, align the

tongue on the battery cartridge with the

groove in the housing and slip it into place.

Always insert it all the way until it locks in

place with a little click. If not, it may acci-

dentally fall out of the tool, causing injury

to you or someone around you.

Button

Battery cartridge

*Do

not use force when inserting the battery cartridge. If the cartridge does not slide in

easily, it is not being inserted correctly

Charging

*Your new battery cartridge is not charged.

You will need to charge it before use. Use

the fast charger Model DC1410 to charge

the battery cartridge.

*Plug the fast charger into the proper A.C.

voltage source. The charging light will flash

in green color.

*Insert the battery cartridge so that the plus

and minus terminals on the battery car-

tridge are on the same sides as their

respective markings on the fast charger.

Insert the cartridge fully into the port so that it rests on the charger port floor.

red and charging will begin. The charging light will remain lit steadily during charging.

charging time is approximately one hour.

*When the battery cartridge is inserted, the charging light color will change from green to

*When charging is completed, the charging light color will change from red to green. The

*After charging, unplug the charger from the power source.

CAUTION:

*The fast charger Model DC1410 is for charging Makita battery cartridge. Never use it for

other purposes or for other manufacturer's batteries.

*When you charge a new battery cartridge or a battery cartridge which has not been used

for a long period of time, it may not accept a full charge. This is a normal condition and

does not indicate a problem. You can recharge the battery cartridge fully after discharging

it completely and recharging a couple of times.