Makita 6203DWAE Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Дриль. Makita 6203DWAE. Makita 6203DWAE 17 сторінок. Cordless driver drill equipped with electric brake
Також для Makita 6203DWAE: Технічна інформація (5 сторінок)
Друкувати сторінку
Installing
or
removing battery cartridge
*Always switch off the tool before insertion
or removal of the battery cartridge.
*To remove the battery cartridge, withdraw
it from the tool while pressing the buttons
on both sides of the cartridge.
*To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the housing and slip it into place.
Always insert it all the way until it locks in
place with a little click. If not, it may acci-
dentally fall out of the tool, causing injury
to you or someone around you.
Button
Battery cartridge
*Do
not use force when inserting the battery cartridge. If the cartridge does not slide in
easily, it is not being inserted correctly
Charging
*Your new battery cartridge is not charged.
You will need to charge it before use. Use
the fast charger Model DC1410 to charge
the battery cartridge.
*Plug the fast charger into the proper A.C.
voltage source. The charging light will flash
in green color.
*Insert the battery cartridge so that the plus
and minus terminals on the battery car-
tridge are on the same sides as their
respective markings on the fast charger.
Insert the cartridge fully into the port so that it rests on the charger port floor.
red and charging will begin. The charging light will remain lit steadily during charging.
charging time is approximately one hour.
*When the battery cartridge is inserted, the charging light color will change from green to
*When charging is completed, the charging light color will change from red to green. The
*After charging, unplug the charger from the power source.
CAUTION:
*The fast charger Model DC1410 is for charging Makita battery cartridge. Never use it for
other purposes or for other manufacturer's batteries.
*When you charge a new battery cartridge or a battery cartridge which has not been used
for a long period of time, it may not accept a full charge. This is a normal condition and
does not indicate a problem. You can recharge the battery cartridge fully after discharging
it completely and recharging a couple of times.
8