Lexmark MX610 Series Instrukcja obsługi poczty e-mail

Przeglądaj online lub pobierz pdf Instrukcja obsługi poczty e-mail dla Drukarka Lexmark MX610 Series. Lexmark MX610 Series 4 stron. Information guide
Również dla Lexmark MX610 Series: Uwaga techniczna (3 strony), Instrukcja obsługi faksu (4 strony), Kopiowanie instrukcji (3 strony), Podręcznik FTP (3 strony), Instrukcja obsługi materiałów eksploatacyjnych (3 strony), Podręcznik informacyjny (1 strony)

Drukuj stronę
Lexmark MX610 Series Instrukcja obsługi poczty e-mail
E-mail Guide
The printer can be used to e-mail scanned documents to one or more recipients.
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the printer control panel
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.
3
From the home screen, navigate to:
E-mail > Recipient(s)
4
Type the e‑mail address, or press # using the keypad, and then enter the shortcut number.
Notes:
•
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
•
You can also enter an e‑mail address using the address book.
5
Touch Done > Send It.
Sending an e‑mail using a shortcut number
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Press #, then enter the shortcut number using the keypad, and then touch
Note: To enter additional recipients, touch Next address, and then enter the address or shortcut number that you want
to add.
4
Touch Send It.
Sending an e‑mail using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
E-mail Guide
Page 1 of 4
.