ALIEN ENCLOSURES 67-69 FIREBIRD CONVERTIBLE TRUNK PANEL KIT Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe ALIEN ENCLOSURES 67-69 FIREBIRD CONVERTIBLE TRUNK PANEL KIT. ALIEN ENCLOSURES 67-69 FIREBIRD CONVERTIBLE TRUNK PANEL KIT 9 stron.

Drukuj stronę

Finally install each of the side panels.

These must be installed top rear first

(thin pointed end of side panel). You

may need to shift the floor and rear

panels slightly to make each of the

edges touch (they will touch with ad-

justment).

(Figure 11)

*Un-upholstered Kits

Once you have finished the test fit of the panels, you may need to trim some of the panels. This can

be done with a sharp utility knife or power saw and/or sander. Trim as necessary.

Remove bracing blocks before upholstery. Mark each of the blocks with identifying marks for proper

re-attachment.

UPHOLSTERY:

There are actually several different ways to upholster the panels. In the photos

shown; the inserts (N) were left out and the backing panels (BP) were covered with an alternate

fabric. You may prefer to cover the panel and backing panel together with a tight wrapped and glued

style where the covering material is stretched and pressed into the recesses. Another method would

be to cover the inserts with an alternate material or with the same material as the main panel to give it

a tucked look.

Depending on your chosen upholstery style, you will need to upholster backing panels. Evenly space

over opening from behind and use the 7- 7/16" framing screws to attach approx 6" apart from each

We have also found the addition of a permanent glue, (like Gorilla Glue) works great!

other.

After all pieces are upholstered, affix hook & loop strips to the bracing blocks with both sides affixed

(the opposite piece attached). This will align the opposite piece with the fixed piece.

Remove the panels slowly to keep second hook & loop piece attached. If it comes loose, you may

need to measure and re-fix. We strongly suggest using staples to aid in the attachment of the hook &

loop to each of the blocks and panels.

67-69 f body convertible

Trunk Panel Kit Instructions

(Figure 11)