Garmin FORETREX 601 BALLISTIC EDITION Instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oglądaj Garmin FORETREX 601 BALLISTIC EDITION. Garmin FORETREX 601 BALLISTIC EDITION 30 stron. Ballistic edition
Również dla Garmin FORETREX 601 BALLISTIC EDITION: Instrukcja obsługi (18 strony)
Drukuj stronę
System Settings
From the menu page, select SETUP > SYSTEM.
GPS MODE: Sets the satellite system to GPS, GPS + GLONASS, GPS + GALILEO, ULTRATRAC, or DEMO (GPS
off). The ULTRATRAC option records track points and sensor data less frequently.
WAAS: Enables the system to use Wide Area Augmentation System/European Geostationary Navigation Overlay
Service (WAAS/EGNOS) data.
BEEPER: Sets the beeper to sound for key tones and messages or messages only.
BATTERY: Allows you to change the type of AAA battery you are using.
LANGUAGE: Sets the text language on the device.
SPANNER: Allows you to use the device USB port with most NMEA
creating a virtual serial port.
OWNER INFO: Allows you to enter owner information, such as your name, and set it to appear when the device
turns on.
Tracks Settings
From the menu page, select SETUP > TRACKS.
RECORDING: Enables track recording.
RECORD INTERVAL: Sets the track log recording method and rate. You can use the DISTANCE option to enter
the distance between recorded track points. You can use the TIME option to enter the time between recorded
track points. You can use the AUTO option to automatically record track points based on the selected
resolution level.
RESOLUTION: Sets how often track points are recorded. A higher resolution records points more frequently and
creates a more detailed track, but fills the track log faster.
WRAP WHEN FULL: Indicates whether track points are overwritten when the device memory is full.
Map Settings
From the menu page, select SETUP > MAP.
MAP ORIENTATION: Adjusts how the map is shown on the page. The NORTH UP option shows north at the top
of the page. The TRACK UP option shows your current direction of travel toward the top of the page.
AUTO ZOOM: Automatically sets the zoom level for optimal use of your map. When this setting is turned off, you
must zoom in or out manually.
GO TO LINE: Sets the behavior of the pointer that appears on the map. BEARING points in the direction of your
destination. COURSE shows your relationship to the course line leading to the destination.
Jumpmaster
The jumpmaster feature is for use by experienced skydivers only. The jumpmaster feature should not be used
as a primary skydiving altimeter. Failure to input the appropriate jump related information can lead to serious
personal injury or death.
The jumpmaster feature follows military guidelines for calculating the high altitude release point (HARP). The
device detects automatically when you have jumped to begin navigating toward the desired impact point (DIP)
using the barometer and electronic compass.
Customizing Your Device
0183-compliant mapping programs by
®
WARNING
15