Brother 885-X03 Instrukcja obsługi - Strona 17

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

1 Spool pin

2 Thread guide (back)

3 Thread guide (front)

CAUTION

●

When threading the upper thread, carefully follow the instructions. If the upper threading is

not correct, the thread may become tangled or the needle may bend or break.

●

Never use a thread weight of 20 or lower.

●

Use the needle and the thread in the correct combination. For details on the correct

combination of needles and threads, refer to "FABRIC, THREAD, AND NEEDLE

COMBINATIONS" on page 21.

Turn off the machine.

1

Raise the presser foot lever.

2

1 Presser foot lever

Raise the needle by turning the

3

handwheel toward you

(counterclockwise) so that the mark on

the wheel points up.

• If the needle is not correctly raised, the

sewing machine can not be threaded.

1 Mark on the wheel

2

2

3

4

1

1

1

4 Thread take-up lever

5 Mark on the handwheel

Pull up the spool pin and put a spool of

4

thread on this pin.

CAUTION

●

If the spool of thread is in the wrong

place, or is set incorrectly, the thread

may tangle on the spool pin and cause

the needle to break.

1

5

16