Garmin GNC 420 Dodatek do podręcznika pilota - Strona 20

Przeglądaj online lub pobierz pdf Dodatek do podręcznika pilota dla Wyświetlacz awioniki Garmin GNC 420. Garmin GNC 420 27 stron. 400/500 series gts 8xx interface
Również dla Garmin GNC 420: Instrukcja obsługi (6 strony), Dodatek do podręcznika pilota (4 strony), Skrócona instrukcja obsługi (17 strony), Skrócona instrukcja obsługi (23 strony), Dodatek do podręcznika pilota (22 strony), Podręcznik operacyjny pilota (8 strony)

Section 4

Ryan TCAD Interface

The Map Page can display TCAD trafﬁ c in any

of the top three ﬁ elds (or top four ﬁ elds on a 500

Series unit) located on the right-hand side of the

display.

Operator Controls and Basic Displays

If there is no communication between the unit display and the TCAD unit, a message will appear, noti-

fying the user. After initialization, proceed with operation of the 400/500 Series unit in a normal manner.

TCAD data can be shown in a "thumbnail" view on the Map Page.

TCAD data also displays on both the Traffic Page and the Map Page if heading data is available. The

symbols for closing and parting traffic shown on both the Map Page and the Traffic Page are identical to

those shown on the Ryan TCAD:

• TRFC (White)—Altitude separation >500 feet, steady altitude separation

• TA (Yellow)—Altitude separation <=500 feet, steady altitude separation

• TRFC (White)—Altitude separation >500 feet, closing

• PA (White)—Altitude separation <=500 feet, parting

• TRFC (White)—Altitude separation >500 feet, parting

• TA (Yellow)—Altitude separation <=500 feet, closing