Garmin GNC 420 Pilot El Kitabı Eki - Sayfa 20

Aviyonik Ekran Garmin GNC 420 için çevrimiçi göz atın veya pdf Pilot El Kitabı Eki indirin. Garmin GNC 420 27 sayfaları. 400/500 series gts 8xx interface
Ayrıca Garmin GNC 420 için: Talimatlar Kılavuzu (6 sayfalar), Pilot El Kitabı Eki (4 sayfalar), Hızlı Referans (17 sayfalar), Hızlı Referans (23 sayfalar), Pilot El Kitabı Eki (22 sayfalar), Pilot İşletim El Kitabı (8 sayfalar)

Section 4

Ryan TCAD Interface

The Map Page can display TCAD trafﬁ c in any

of the top three ﬁ elds (or top four ﬁ elds on a 500

Series unit) located on the right-hand side of the

display.

Operator Controls and Basic Displays

If there is no communication between the unit display and the TCAD unit, a message will appear, noti-

fying the user. After initialization, proceed with operation of the 400/500 Series unit in a normal manner.

TCAD data can be shown in a "thumbnail" view on the Map Page.

TCAD data also displays on both the Traffic Page and the Map Page if heading data is available. The

symbols for closing and parting traffic shown on both the Map Page and the Traffic Page are identical to

those shown on the Ryan TCAD:

• TRFC (White)—Altitude separation >500 feet, steady altitude separation

• TA (Yellow)—Altitude separation <=500 feet, steady altitude separation

• TRFC (White)—Altitude separation >500 feet, closing

• PA (White)—Altitude separation <=500 feet, parting

• TRFC (White)—Altitude separation >500 feet, parting

• TA (Yellow)—Altitude separation <=500 feet, closing