Garmin Fishfinder 400C Instrukcja obsługi - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie morskie Garmin Fishfinder 400C. Garmin Fishfinder 400C 40 stron. Flush mount kit instructions and template (multilingual)
Również dla Garmin Fishfinder 400C: Skrócona instrukcja obsługi (2 strony), Ważne informacje dotyczące bezpieczeństwa (48 strony), Deklaracja zgodności (1 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (30 strony), Instrukcja obsługi (21 strony)

dvanced

Press MENU on any screen to access advanced options.

Dual Frequency

Range—By default, the range is set to Auto. The range of the depth

scale on the right side of the screen adjusts automatically as the

depth readings increase or decrease. Highlight Manual Range and

press SElECt to manually adjust the scope of the depth scale.

Gain—controls the sensitivity of the Fishfinder 400C's sonar

receiver. By default, the Gain is set to Auto, which automatically

sets the sonar sensitivity.

Fishfinder 400C Owner's Manual

ettIngs

Dual Beam

Highlight Manual Gain, and press SElECt to manually adjust

the Gain. To see more detail, increase the Gain. If there is too much

detail, or the screen is cluttered, decrease the Gain.

beam—when using a Dual Beam transducer, select a wide or

narrow beam.

Frequency—when using a Dual Frequency transducer, select how

the frequencies appear on screen. By default, the frequency is set

to 200kHz. You can specify that the unit uses only the 200kHz

frequency, the 50kHz frequency, or Dual Frequency.

NOtE: If you choose Dual, the Split Freq screen appears.

Zoom—zoom in to a section of the Full Screen. The zoom is off, or

set to No Zoom by default. Four options are available:

• 2x Zoom—twice the magnification.

• 4x Zoom—four times the magnification.

• bottom lock—locks the zoom window to the bottom. The

default zoom span is 10 ft, and can be adjusted.

• Split Zoom—opens the Split Zoom screen.

dvanced

ettIngs