Garmin Fishfinder 400C 소유자 매뉴얼 - 페이지 31

{카테고리_이름} Garmin Fishfinder 400C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 400C 40 페이지. Flush mount kit instructions and template (multilingual)
Garmin Fishfinder 400C에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 중요 안전 정보 (48 페이지), 적합성 선언 (1 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (30 페이지), 소유자 매뉴얼 (21 페이지)

페이지 인쇄

dvanced

Press MENU on any screen to access advanced options.

Dual Frequency

Range—By default, the range is set to Auto. The range of the depth

scale on the right side of the screen adjusts automatically as the

depth readings increase or decrease. Highlight Manual Range and

press SElECt to manually adjust the scope of the depth scale.

Gain—controls the sensitivity of the Fishfinder 400C's sonar

receiver. By default, the Gain is set to Auto, which automatically

sets the sonar sensitivity.

Fishfinder 400C Owner's Manual

ettIngs

Dual Beam

Highlight Manual Gain, and press SElECt to manually adjust

the Gain. To see more detail, increase the Gain. If there is too much

detail, or the screen is cluttered, decrease the Gain.

beam—when using a Dual Beam transducer, select a wide or

narrow beam.

Frequency—when using a Dual Frequency transducer, select how

the frequencies appear on screen. By default, the frequency is set

to 200kHz. You can specify that the unit uses only the 200kHz

frequency, the 50kHz frequency, or Dual Frequency.

NOtE: If you choose Dual, the Split Freq screen appears.

Zoom—zoom in to a section of the Full Screen. The zoom is off, or

set to No Zoom by default. Four options are available:

• 2x Zoom—twice the magnification.

• 4x Zoom—four times the magnification.

• bottom lock—locks the zoom window to the bottom. The

default zoom span is 10 ft, and can be adjusted.

• Split Zoom—opens the Split Zoom screen.

dvanced

ettIngs