Garmin GTX 345 Instrukcja obsługi - Strona 25
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Radio morskie Garmin GTX 345. Garmin GTX 345 28 stron. Enstrom 480b ads-b transponder
Również dla Garmin GTX 345: Podręcznik pilota (34 strony), Instrukcja obsługi (28 strony)
Drukuj stronę
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
6. The following system limitations are applicable when
there is no heading source (EFIS, EHSI, HSI, or CDI)
interfaced to the GTX:
a. The traffic page is oriented to rotorcraft TRACK, and
may or may not align with the rotorcraft heading.
b. The traffic display will not show ADS-B traffic when
groundspeed is less than 15 kts. Aural traffic alerts
will issue, appropriately. If interfaced with TAS:
7-3. Operation
A view of the front panel is shown in Figure 7-3. The control
keys and functions are briefly explained in Table 7-1.
1. Position the AVI MSTR switch to ON to apply system
power, if not already switched on.
a. Press either the ON, SBY, or ALT keys to turn on
b. After power-on, a start-up page is displayed while
Report No. 28-AC-078
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
ENSTROM 480B RFM SUPPLEMENT
TAS traffic targets will continuously display at all
speeds.
If in excess of 15 knots in backward or sideward
flight, TAS and ADS-B targets may not correlate.
Two targets may appear on the display for each
actual target being received over both ADS-B and
TAS.
Figure 7-3. GTX 345 Front Panel
the unit.
the system performs a self-test. If the unit detects
an
internal
"TRANSPONDER FAILED".
level of this Rotorcraft Flight Manual Supplement.
failure,
the
7-5
screen
displays
Dec 3/18