Brother RuggedJet RJ-4040 Instrukcja oprogramowania - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja oprogramowania dla Drukarka Brother RuggedJet RJ-4040. Brother RuggedJet RJ-4040 48 stron. Multi-protocol on-board ethernet print server and wireless ethernet print server
Również dla Brother RuggedJet RJ-4040: Skrócona instrukcja obsługi (2 strony), Podręcznik użytkownika (33 strony), Skrócona instrukcja obsługi (1 strony), Podręcznik użytkownika (34 strony), Podręcznik bezpieczeństwa produktu (22 strony)

Drukuj stronę
Brother RuggedJet RJ-4040 Instrukcja oprogramowania
(6) Phase type and phase number
If the phase number is not used, both are fixed at 00h.
Receiving state
Phase
Waiting to receive
Printing state
Phase
Printing
 When the printer is turned on, it is in the receiving state. When printing begins, it changes to the "printing"
phase (phase type: printing state; phase number: printing), and the printer sends that phase status to the
computer. When printing has finished, the printer sends the "receiving state" phase status (phase type:
receiving state; phase number: waiting to receive) to the computer. Unless an error occurs during printing,
the printer sends the "printing completed" status.
 With concurrent printing, printing starts even if a print command has not been sent from the computer in
order to print at high speed. At this time, care should be taken since the "printing" and "waiting to receive"
phase statuses will be sent. (Refer to
(7) Notification number
Cooling (started)
Cooling (finished)
(8) Battery level
Charging required
AC adaptor in use
Phase State
Receiving state
Printing state
Value (Dec.)
0
Value (Dec.)
0
"6. Flow
Notification
Not available
Battery Level
Full
Half
Low
Higher Order Bytes
00h
Higher Order Bytes
00h
Charts".)
- 22 -
Raster Command Reference
Phase Type
00h
01h
Lower Order Bytes
00h
Lower Order Bytes
00h
Value
00h
01h
02h
Value
00h
01h
02h
03h
04h
4. Printing Command Details