Fujitsu Lifebook P7120D Bios Manual - Strona 6

Przeglądaj online lub pobierz pdf Bios Manual dla Laptop Fujitsu Lifebook P7120D. Fujitsu Lifebook P7120D 26 stron. Disassembly
Również dla Fujitsu Lifebook P7120D: Łatwa instrukcja obsługi (37 strony), Procedury techniczne (11 strony), Instrukcja montażu (11 strony)

Drukuj stronę

L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

■

LBA Mode

Disabled

Control:

■

Enabled

■

Transfer

Standard

Mode:

■

Fast PIO 1

■

Fast PIO 2

■

Fast PIO 3

■

Fast PIO 4

■

Multiword DMA 1

■

Multiword DMA 2

■

Ultra DMA

Disabled

Mode:

■

Mode 0

■

Mode 1

■

Mode 2

■

Mode 3

■

Mode 4

■

Mode 5

■

A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or

DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk for-

mat CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take drive

C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or DVD-ROM

can never use a C: designation if a formatted internal hard drive is present since the C: designator is always

reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your applica-

tion software will use the new designations.

■

Be careful of the operating environment when booting from CD-ROM/DVD-ROM or you may mistakenly over-

write files.

Default

Description

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder, Head, Sector

addressing. This option cannot be changed when Auto is selected.

[Multiword

Selects the method for moving data to/from the drive. Autotype the drive to

DMA 2]

select the optimum transfer mode. This option cannot be changed when Auto

is selected.

[Disabled]

Selects the method for moving data to/from the drive. Autotype the drive to

select the optimum transfer mode. This option cannot be changed when Auto

is selected.