Fujitsu Lifebook P7120D Bios Kılavuzu - Sayfa 6
Dizüstü Bilgisayar Fujitsu Lifebook P7120D için çevrimiçi göz atın veya pdf Bios Kılavuzu indirin. Fujitsu Lifebook P7120D 26 sayfaları. Disassembly
Ayrıca Fujitsu Lifebook P7120D için: Kolay Kullanım Kılavuzu (37 sayfalar), Teknik Prosedürler (11 sayfalar), Montaj Kılavuzu (11 sayfalar)
Sayfayı Yazdır
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
■
LBA Mode
Disabled
Control:
■
Enabled
■
Transfer
Standard
Mode:
■
Fast PIO 1
■
Fast PIO 2
■
Fast PIO 3
■
Fast PIO 4
■
Multiword DMA 1
■
Multiword DMA 2
■
Ultra DMA
Disabled
Mode:
■
Mode 0
■
Mode 1
■
Mode 2
■
Mode 3
■
Mode 4
■
Mode 5
■
A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or
DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk for-
mat CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take drive
C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or DVD-ROM
can never use a C: designation if a formatted internal hard drive is present since the C: designator is always
reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your applica-
tion software will use the new designations.
■
Be careful of the operating environment when booting from CD-ROM/DVD-ROM or you may mistakenly over-
write files.
6
Default
Description
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder, Head, Sector
addressing. This option cannot be changed when Auto is selected.
[Multiword
Selects the method for moving data to/from the drive. Autotype the drive to
DMA 2]
select the optimum transfer mode. This option cannot be changed when Auto
is selected.
[Disabled]
Selects the method for moving data to/from the drive. Autotype the drive to
select the optimum transfer mode. This option cannot be changed when Auto
is selected.