Brother QL-1060N Instrukcja obsługi dla sieci - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla sieci dla Urządzenie do tworzenia etykiet Brother QL-1060N. Brother QL-1060N 41 stron. Label printer
Również dla Brother QL-1060N: Instrukcja obsługi dla sieci (42 strony), Podręcznik użytkownika (42 strony), Instrukcja obsługi oprogramowania (40 strony), Instrukcja obsługi dla sieci (48 strony), Instrukcja obsługi oprogramowania (48 strony), Podręcznik użytkownika (40 strony), Podręcznik użytkownika (48 strony), Podręcznik użytkownika (41 strony), Podręcznik użytkownika (24 strony)

Brother QL-1060N Instrukcja obsługi dla sieci
a
Type http://printer_ip_address/ into your browser. (Where printer_ip_address is the IP
address or the print server name)
For example:
http://192.168.1.2/ (if the printer's IP address is 192.168.1.2.)
Note
If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter
the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter
the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The
NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
"BRNxxxxxxxxxxxx" where "xxxxxxxxxxxx" is the Ethernet address.
b
Click Network Configuration.
c
Enter a user name and a password. The User Name is admin and the default Password is access.
d
Click OK.
e
You can now change the print server settings.

Printing the Printer Settings

Note
Node name: Node name appears in the Printer Settings Page. The default Node name of the network card
in the printer is "BRNxxxxxxxxxxxx" where "xxxxxxxxxxxx" is the Ethernet address.
The Printer Settings Page prints a report listing the network settings. You can print the Printer Settings Page
using the cut button of the printer.

How to print the Printer Settings Page

a
Make sure that the DK roll is set and the front cover is closed.
To print the Printer Settings Page, we recommend to use 4" (102mm) DK roll.
b
Turn on the printer.
c
Press and hold the Cut button.
Note
• To reset network setting and turn APIPA ON
Turn off the printer. Keep pressing ON/OFF button and press CUT button twice. All the network setting
will be reset. Wait for two seconds after pressing ON/OFF button and press CUT button.
• To reset network setting and turn APIPA OFF
Turn off the printer. Keep pressing ON/OFF button and press CUT button four times. All the network
setting will be reset. Wait for two seconds after pressing ON/OFF button and press CUT button.
Configuring your network printer
2
2
14