Brother QL-1060N Manual do utilizador da rede - Página 19

Procurar online ou descarregar pdf Manual do utilizador da rede para Fabricante de etiquetas Brother QL-1060N. Brother QL-1060N 41 páginas. Label printer
Também para Brother QL-1060N: Manual do utilizador da rede (42 páginas), Manual do utilizador (42 páginas), Manual do utilizador do software (40 páginas), Manual do utilizador da rede (48 páginas), Manual do utilizador do software (48 páginas), Manual do utilizador (40 páginas), Manual do utilizador (48 páginas), Manual do utilizador (41 páginas), Manual do utilizador (24 páginas)

Type http://printer_ip_address/ into your browser. (Where printer_ip_address is the IP

address or the print server name)

For example:

http://192.168.1.2/ (if the printer's IP address is 192.168.1.2.)

Note

If you have edited the hosts file on your computer or are using a Domain Name System, you can also enter

the DNS name of the print server. As the print server supports TCP/IP and NetBIOS, you can also enter

the NetBIOS name of the print server. The NetBIOS name can be seen on the printer settings page. The

NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as

"BRNxxxxxxxxxxxx" where "xxxxxxxxxxxx" is the Ethernet address.

Click Network Configuration.

Enter a user name and a password. The User Name is admin and the default Password is access.

Click OK.

You can now change the print server settings.

Printing the Printer Settings

Note

Node name: Node name appears in the Printer Settings Page. The default Node name of the network card

in the printer is "BRNxxxxxxxxxxxx" where "xxxxxxxxxxxx" is the Ethernet address.

The Printer Settings Page prints a report listing the network settings. You can print the Printer Settings Page

using the cut button of the printer.

Make sure that the DK roll is set and the front cover is closed.

To print the Printer Settings Page, we recommend to use 4" (102mm) DK roll.

Turn on the printer.

Press and hold the Cut button.

Note

• To reset network setting and turn APIPA ON

Turn off the printer. Keep pressing ON/OFF button and press CUT button twice. All the network setting

will be reset. Wait for two seconds after pressing ON/OFF button and press CUT button.

• To reset network setting and turn APIPA OFF

Turn off the printer. Keep pressing ON/OFF button and press CUT button four times. All the network

setting will be reset. Wait for two seconds after pressing ON/OFF button and press CUT button.

Configuring your network printer