Brother DCP120C - Flatbed Multifunction Photo Capture Center Podręcznik szybkiej konfiguracji - Strona 20

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Faks Brother DCP120C - Flatbed Multifunction Photo Capture Center. Brother DCP120C - Flatbed Multifunction Photo Capture Center 24 stron. Quick setup guide - french
Również dla Brother DCP120C - Flatbed Multifunction Photo Capture Center: Skrócona instrukcja obsługi (33 strony), Lista referencyjna części (30 strony), Podręcznik szybkiej konfiguracji (33 strony), (Francuski) Przewodnik szybkiej instalacji (24 strony)

STEP2

Installing the Driver & Software

For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4-9.

Unplug the machine from the AC outlet and

from your computer, if you already connected

an interface cable.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here 9.1-9.2 icon to

install the printer and scanner drivers. If the

language screen appears, choose your

language.

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and restart

your Macintosh

Open the scanner cover to its open position.

9.1 to 9.2

Connect the USB cable to the USB socket

marked with a

USB socket above and to the left of the ink

cartridge slots, as shown below.

Carefully route the USB cable through the

trench and out the back of the machine as

shown below.

Then, connect it to your Macintosh

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Macintosh

symbol. You will find the