Fujitsu FI-5015C Pierwsze kroki - Strona 22

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu FI-5015C. Fujitsu FI-5015C 26 stron. Image scanner
Również dla Fujitsu FI-5015C: Broszura i specyfikacje (2 strony), Pierwsze kroki (24 strony), Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych (10 strony)

Symptom

Paper is not fed (pick error

occurs frequently, or docu-

ment stops midway).

The generated images are

elongated.

There is a shadow on the

leading edge of the gener-

ated image?

* "Multi feed" means that more than 2 papers are fed at the same time.

AP-2

Check this item

Do the documents satisfy the "Docu-

ment Quality"in Section 2.3.1of the fi-

5015C Operator's Guide?

Is the thick document placed on the Flat-

bed?

Is the Pick roller unit dirty?

Is the Pick roller unit worn out?

Are the Pick roller unit dirty?

Have you adjusted the offset (the scan-

ning starting position)?

Remedy

Scan the document by Flatbed.

Is the thick document placed on the Flatbed?

Clean the Pick roller unit. Refer to the Operator's

Guide "3.2.3 Cleaning the ADF".

Replace the Pick roller unit. Refer to the Opera-

tor's Guide "3.3.4 Replacing the Pick roller unit".

Clean the Pick roller unit. Refer to the Operator's

Guide "3.2.3 Cleaning the ADF".

Clean the Pick roller unit. Refer to the Operator's

Guide "3.2.3 Cleaning the ADF".

Adjust the [Sub-scan Setting] on [Scanners and

Cameras] in the control panel.