Fujitsu FI-5015C Pierwsze kroki - Strona 24

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu FI-5015C. Fujitsu FI-5015C 26 stron. Image scanner
Również dla Fujitsu FI-5015C: Broszura i specyfikacje (2 strony), Pierwsze kroki (24 strony), Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych (10 strony)

Drukuj stronę

Appendix2

When operating the scanner, the

ARNI N G

ADF's inside glass becomes very

hot.

Before you clean inside the scan-

ner, turn off its power and unplug

the AC adapter from the outlet. Wait

for at least 15 minutes.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaner F1

CA99501-

(or isopropyl

0013

alcohol)

Lint-free dry

- Commercially available one

cloth

For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

AP-4

DAILY CARE

Remarks

1 bottle

Moisten a cloth with

this fluid and wipe the

scanner clean.

■ Locations and Cycle for Cleaning

Part to clean

Pad ASSY

Pick roller unit

Pinch roller

Glass

The scanner must be cleaned more fre-

ATTENTION

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such

as carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Documents written by pencil

•

Documents with not enough fixed a

toner.

For details on the cleaning the ADF, refer to "3.2 clean-

ing the ADF" in fi-5015C Operator's Guide on the Setup

CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

1,000 scans.