Fujitsu FI-5015C Başlarken - Sayfa 24

Tarayıcı Fujitsu FI-5015C için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu FI-5015C 26 sayfaları. Image scanner
Ayrıca Fujitsu FI-5015C için: Broşür ve Teknik Özellikler (2 sayfalar), Başlarken (24 sayfalar), Sarf Malzemesi Değiştirme ve Temizleme Talimatlarısarf Malzemesi Değiştirme ve Temizleme Talimatları (10 sayfalar)

Sayfayı Yazdır

Appendix2

When operating the scanner, the

ARNI N G

ADF's inside glass becomes very

hot.

Before you clean inside the scan-

ner, turn off its power and unplug

the AC adapter from the outlet. Wait

for at least 15 minutes.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaner F1

CA99501-

(or isopropyl

0013

alcohol)

Lint-free dry

- Commercially available one

cloth

For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

AP-4

DAILY CARE

Remarks

1 bottle

Moisten a cloth with

this fluid and wipe the

scanner clean.

■ Locations and Cycle for Cleaning

Part to clean

Pad ASSY

Pick roller unit

Pinch roller

Glass

The scanner must be cleaned more fre-

ATTENTION

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such

as carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Documents written by pencil

•

Documents with not enough fixed a

toner.

For details on the cleaning the ADF, refer to "3.2 clean-

ing the ADF" in fi-5015C Operator's Guide on the Setup

CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

1,000 scans.