Fujitsu Fujitsu fi-5950 Pierwsze kroki - Strona 22

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Fujitsu Fujitsu fi-5950. Fujitsu Fujitsu fi-5950 27 stron. Image scanner
Również dla Fujitsu Fujitsu fi-5950: Broszura i specyfikacje (4 strony), Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych (24 strony), Pierwsze kroki (11 strony)

Drukuj stronę

Symptom

Paper is not fed (pick error

occurs frequently, or docu-

ment stops midway).

The generated images are

elongated.

There is a shadow on the

leading edge of the gener-

ated image.

Check this item

Do the documents satisfy the "Docu-

ment Quality" and the "Multifeed Detec-

tion Conditions" in the chapter 7 of the

fi-5950 Operator's Guide?

Are the Separator roller or the Pick roll-

ers dirty?

Are the Separator roller or the Pick roll-

ers worn out?

Is there any debris on the document feed

path?

Have you set the Paper Thickness on the

Operator panel?

Are the Feed rollers or the Pinch rollers

dirty?

Have you adjusted the Vertical Magnifi-

cation?

Have you adjusted the offset (the scan-

ning starting position)?

Use the documents that satisfy the "Document

Quality" and the "Multifeed Detection Condi-

tions" in chapter 7 of the fi-5950 Operator's

Guide.

Clean the Separator roller or the Pick rollers.

Refer to the fi-5950 Operator's Guide "4. DAILY

CARE".

Replace the Separator roller or the Pick rollers.

Refer to the fi-5950 Operator's Guide "5.

REPLACEMENT OF CONSUMABLES".

Remove any debris from the document feed path.

Set the Paper Thickness thinner.

Refer to

"1.3 Operator Panel" (page.

Clean the Feed rollers or the Pinch rollers. Refer

to the fi-5950 Operator's Guide "4. DAILY

CARE".

Start up the Software Operation Panel, select

[Device Set] and then click the [Offset] button.

Adjust the vertical magnification. Refer to the fi-

5950 Operator's Guide "8.3 Offset/Scan scale".

Start up the Software Operation Panel, select

[Device Set] and then click the [Offset] button.

Adjust the offset setting. Refer to the fi-5950

Operator's Guide "8.3 Offset/Scan scale".

AP-2

Remedy

2).