Fujitsu M3093GX Instrukcja obsługi - Strona 32
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Skaner Fujitsu M3093GX. Fujitsu M3093GX 50 stron. Departmental document scanner
Również dla Fujitsu M3093GX: Podręcznik procedur instalacji (7 strony), Podręcznik procedur instalacji (9 strony), Broszura i specyfikacje (2 strony), Instrukcja czyszczenia (12 strony), Procedura instalacji (5 strony)
Drukuj stronę
5.3.2 Cleaning the ADF
Clean the automatic document feeder (ADF) once every 5,000 pages.
The cycle depends on the types of documents used (paper quality, a
level of toner fusing on paper).
1
2
3
ADF lever
Pad
Automatic document feeder
Sheet guide (white part)
Pull the ADF lever up to open the ADF.
Use the dry cloth or a cloth with ethyl alcohol to softly remove
dirt and dust as follows.
Pad:
Wipe the pad in a downward direction (indi-
cated by the arrow). Be careful not to hook
the pick spring when wiping.
Glass:
Wipe the glass lightly.
Pick roller :
Wipe the roller softly. Be careful not to
damage the surface of the roller.
Feed roller and coupled feed roller:
Wipe the rollers softly. Be careful not to
damage the surface of the rollers.
Ejection roller and coupled ejection roller:
Wipe the rollers softly. Be careful not to
damage the surface of the rollers.
Sheet guide (white part):
Wipe the sheet guide softly.
Close the ADF to lock the ADF lever.
Feed roller
Pick spring
Figure 5.3
Cleaning the ADF
Ejection roller (Clean the roller
on the opposite side also.)
Pick rollers
Coupled feed roller
Glass
5 – 3