A-M Systems 2100 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe A-M Systems 2100. A-M Systems 2100 19 stron. Isolated pulse stimulator

Examples

Simple setup (and minimal instrument test)

Connect the output of the Model 2100 to an oscilloscope. Before connecting the Model

2100 to any other instrument, or the experimental preparation, it is safest to turn its

power off.

Set the Output controls:

Range:

Pulse Sign:

Baseline:

Pulse Amplitude:

Setting The Timing Controls:

Delay:

Burst Width:

Duration:

Period:

Setting The Start Controls:

Mode:

Disconnect any cables to the TRIG or GATE inputs.

Note that the green Trig and Event indicators turn on as Free Run is turned on (and

turn off otherwise). You should observe a 15ms duration, 20Hz rate pulse. of 2.00V

above a 0V baseline on the oscilloscope.

A-M Systems

Operating Instructions

131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324

Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525

E-mail: [email protected] * Website:

10V

Zero

2.00

none

single

-2

1.50 * 10

5.00 * 10

-2

Free Run

http://www.a-msystems.com