Fujitsu ScanSnap iScanner fi-6010N Podręcznik dla początkujących - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Skaner Fujitsu ScanSnap iScanner fi-6010N. Fujitsu ScanSnap iScanner fi-6010N 45 stron. Network adf scanner
Również dla Fujitsu ScanSnap iScanner fi-6010N: Specyfikacje (2 strony), Podręcznik dla początkujących (21 strony), Broszura i specyfikacje (2 strony), Podręcznik dla początkujących (21 strony), Instrukcje czyszczenia (2 strony), Instrukcje czyszczenia (2 strony)

Fujitsu ScanSnap iScanner fi-6010N Podręcznik dla początkujących
5. Enter the password.
Password is case sensitive.
Enter "password" here.
6. Press the [Login] button.
If the administrator name and password are
valid, the "System Settings" screen appears.
3.2 Changing the Administrator
Password
If you change the password, save
ATTENTION
the new password in a safe location.
If you lose the password, contact
your FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider. This may incur a cost to
reset the scanner.
The administrator password can be changed.
1. Select the [System Settings] tab on the top
menu.
2. Press the [
] button on the left side menu.
Scroll the left side menu down until the
[Admin Password] tab appears.
3. Select the [Admin Password] tab on the left
side menu.
The "Admin Password" screen appears.
4. Enter the "Current Password", "New Pass-
word", and "Confirm New Password".
Passwords must be between 7 and 127 characters
long.
Alphanumeric characters (case sensitive) and
symbols may be entered.
5. Press the [OK] button.
The new admin password is set.

3.3 Setting the Scanner Name

A scanner name may be set to provide a network alias
for the device.
Do not use a name that is already
ATTENTION
being used in the network.
Name duplication will cause a net-
work connection error.
1. Select the [System Settings] tab on the top
menu.
2. Select the [Scanner Name] tab on the left side
menu.
The "Scanner Name" screen appears.
3. Enter a scanner name.
Scanner names may be up to 15 characters long.
Use only alphanumeric characters (case sensitive)
and hyphens.
Scanner names cannot consist of numerical char-
acters only.
A hyphen cannot be used as the first character of a
scanner name.
The scanner can be setup to be a
workgroup or domain member.
HINT
7