- ページ 18
スキャナー Fujitsu ScanSnap iScanner fi-6010NのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ScanSnap iScanner fi-6010N 45 ページ。 Network adf scanner
Fujitsu ScanSnap iScanner fi-6010N にも： 仕様 (2 ページ), スタートマニュアル (21 ページ), パンフレット＆スペック (2 ページ), スタートマニュアル (21 ページ), 洗浄方法 (2 ページ), 洗浄方法 (2 ページ)
ページを印刷する
5. Enter the password.
Password is case sensitive.
Enter "password" here.
6. Press the [Login] button.
If the administrator name and password are
valid, the "System Settings" screen appears.
3.2 Changing the Administrator
Password
If you change the password, save
ATTENTION
the new password in a safe location.
If you lose the password, contact
your FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider. This may incur a cost to
reset the scanner.
The administrator password can be changed.
1. Select the [System Settings] tab on the top
menu.
2. Press the [
] button on the left side menu.
Scroll the left side menu down until the
[Admin Password] tab appears.
3. Select the [Admin Password] tab on the left
side menu.
The "Admin Password" screen appears.
4. Enter the "Current Password", "New Pass-
word", and "Confirm New Password".
Passwords must be between 7 and 127 characters
long.
Alphanumeric characters (case sensitive) and
symbols may be entered.
5. Press the [OK] button.
The new admin password is set.
3.3 Setting the Scanner Name
A scanner name may be set to provide a network alias
for the device.
Do not use a name that is already
ATTENTION
being used in the network.
Name duplication will cause a net-
work connection error.
1. Select the [System Settings] tab on the top
menu.
2. Select the [Scanner Name] tab on the left side
menu.
The "Scanner Name" screen appears.
3. Enter a scanner name.
Scanner names may be up to 15 characters long.
Use only alphanumeric characters (case sensitive)
and hyphens.
Scanner names cannot consist of numerical char-
acters only.
A hyphen cannot be used as the first character of a
scanner name.
The scanner can be setup to be a
workgroup or domain member.
HINT
7